Filter
Top Products
To record your
outgoing message,
speak clearly, 15 to 20
cm from the built-in
microphone.
Read all the steps
before you begin
recording.
Press and hold down
the stop button.
Your Response 125
will beep and the
message indicator
flashes.
Keep holding down
the STOP button and
speak your message
into the microphone.
Located on the right-
hand side of the
base near the end
of the handset.
When you have
finished speaking,
release the STOP
button.
Your Response 125
will automatically play
back your message,
then beep to confirm
the recording. It then
returns to ‘answer on’
mode.
To re-record your
outgoing message,
repeat these steps.
To check your
outgoing message
Press and release the
STOP button
Your Response 125
will beep and play
back your outgoing
message. It will then
beep again and return
to ‘answer on’ mode.
To delete your
outgoing message
You can delete your
outgoing message and
reinstate the pre-
recorded outgoing
message.
Press and release the
STOP button. Your
outgoing message will
be played back to you.
While the message is
playing, press the
DELETE button.
Your Response 125
will beep and play its
pre-recorded outgoing
message.
Your own message
has now been replaced
by the original,
pre-recorded message.
To check the day and
time setting
Press and release the
DELETE button.
The currently set day
and time is announced.
12
1
2
1
2
Built-in
microphone
Hello,your call cannot
be taken at the moment,so please
leave your message after the tone.