Filter
Top Products
Tone is the default setting for the UK.
You should only have to change this if
connected to a switchboard that
requires Pulse dialling.
4. Enter the existing PIN code using the keypad and press .
New PIN
is displayed.
5. Enter a new 4 digit PIN code using the keypad and press .
Repeat PIN
is displayed.
6. Re-enter the new PIN code and press .
Saved
is displayed.
7. Press and hold to return to standby.
Dial mode
Your BT Freestyle 250 is pre-set to tone dialling (DTMF).
You can set the dial mode to pulse dialling if your
switchboard requires.
1. Press to open the main menu.
2. Press or until the display shows
Setup base
and
press .
3. Press or until the display shows
Dial mode
and press
to select.
4. Press or to display either
DTMF
or
Pulse
and press
. You hear a confirmation tone and
Saved
is displayed.
5. Press and hold to return to standby.
Clr
Menu
Menu
Menu
Menu
C
lr
Menu
Menu
Menu
42 Base settings
BT Freestyle 250 – Issue 02 Ed 1 – 02.01.07 – 7971
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com