Filter
Top Products
BT Diverse 5300 – Edition 1 – 1st September ’03
BT Diverse Helpline – 08457 908 070
11
SETTING UP
Insert the two batteries supplied, as
indicated inside the battery
compartment and slide the battery
compartment cover shut.
Insert the batteries Registering the handset
If the icons on the display
flash continuously...
It means that the handset is not
registered with the base station.
Ensure you have correctly carried out
step 3 above. If the product is still not
registered see Registering Manually
on page 12.
All additional handsets you purchase
will need to be individually registered
with the base station before they
will work.
The battery cover may be found in the
packaging with the batteries.
WARNING
Under no circumstances should
non-rechargeable batteries be used.
Using incorrect batteries will invalidate
your guarantee and may damage the
telephone.
To register your handset to a BT Diverse
5310 or 5350 base station, place it in the
main BT Diverse 5300 base station with
the display facing upward. After approx.
one minute, the handset's internal
number is displayed (e.g. 2).
Successful registration is signalled by
a confirmation tone.
Replace the newly registered handset
into the charger and leave to charge for
approximately 16 hours. The charging
status icon flashes on the handset to
indicate that the batteries are being
charged.
When the handset is registered the
display will show: