Filter
Top Products
3
1
2
1
2
HI
LOW
OFF
RINGER
VOLUME
To redial the
last number
You can redial a number
up to 31 digits long.
Lift the handset.
Press the Redial button.
The last number you
called is redialled.
To use the Secrecy
button
You can prevent your
caller from hearing you
while you talk to
someone else close by.
Press the Secrecy button.
The Secrecy light will
come on. While the
Secrecy light is on, your
caller cannot hear you.
Press the Secrecy button
again to resume the
conversation.
Visual ring indicator
When you have an
incoming call the Visual
ring indicator will flash in
time with the ringing
signal. Lift the handset to
answer the call.
Redial
Message Waiting
indicator
This feature is for Meridian
switchboard users only.
When you have Voice
mail messages waiting
the Message Waiting
indicator will flash at
regular constant intervals.
To adjust the ringer
volume
Use the RINGER VOLUME
switch on the underside
of your Converse 120.
Set the volume switch to
the setting you want: HI,
LOW or OFF.
The Visual ring indicator
will flash when you have
an incoming call with all
three settings.
To adjust the
ringer tone
Use the RINGER TONE
switch on the underside
of your Converse 120.
Set the RINGER TONE
switch to the setting you
want: R1 for a low pitch
ring or R2 for a high
pitch ring.
Secrecy
R1
R2
RINGER
Recall button
The Recall button is for
use with switchboard
services and some BT
Select Services.
Phone number label
Use the phone number
label to keep a note of
phone or extension
numbers which you use
frequently.
Slide the label out from
underneath the plastic
cover to write on it.
Mark the numbers in
pencil in case you need to
change them.
Recall