Filter
Top Products
g
58
BT Diverse Helpline – 08457 908 070
After a short period of time
the handset will be registered.
The BT Diverse 5410 will be
allocated the next available
handset number.
Note
To check that the handset has been
registered successfully to the base,
press the PAGE button, all handsets
will ring.
Note
The room monitor function drains the
handset batteries more quickly than
normal use. Make sure the handset is
fully charged before leaving it in the
room to be monitored.
To de-register a handset
Press the INT button. Display
lists the registered handsets.
Press UP/DOWN to highlight
the handset you want to
de-register.
Press MENU.
Scroll DOWN to
De-reg H/set. No
.
Press OK.
Enter the system PIN.
(Original setting
0000
).
Press OK to confirm
de-registration.
Press RED PHONE to return
to the idle display.
To switch the room monitor on
When there are sounds in the
room, the monitor function
detects them.
The listening handset then
rings either the receiving
handset selected or the phone
number you have set. You can
then listen.
OK
OK
OK
INT M
Using a handset as a
room monitor
If you have at least two handsets
registered to your BT Diverse 5410
base station you can leave one handset
in a room and monitor the sounds in
the room by making an internal or an
external call to another handset. This
could be used, for example, in a child’s
bedroom.
Place the handset 1-2 metres away,
with the microphone facing the child.
Always check that the phones are
working properly.
ADDITIONAL HANDSETS
Diverse 5410 user guide 22/8/03 10:15 AM Page 58