Filter
Top Products
48
If you experience any problems, please call the Helpline on or email
Using additional handsets
Use one handset to de-register another. You
cannot de-register the handset you are using.
Default PIN code = 0000
If your BT Synergy 5100 handset is registered to more than one base, you can
select which base to use.
1. Press menU, scroll
or
to registration and press select.
2. Scroll
to select Base and press select.
3. All base numbers are displayed. (In use) is added to bases where the handset
was previously registered to. Scroll
or
to the base you want and
press select.
4. Display shows searcHing Base…. then the standby display for that base.
1. Press menU, scroll
or
to registration and press select.
2. Scroll
to De-register and press select.
3. Enter the system PIN and press ok.
4. Scroll
or
to the handset you want to de-register and
press select.
5. Press Yes to conrm or no to cancel. The display conrms de-registration.
6. Press Back to return to the previous menu level or close the handset cover to
return to standby.