Filter
Top Products
4th Edition – 13.10.98
19
Help
If you have a problem, the following
simple solutions may provide the
answer
messages should be
saved until power
resumes. It will not
be able to record any
new messages,
however.
You cannot hear
messages or incoming
calls
Your Response 15’s
volume may be set too
low. Adjust the volume
by pressing + on the
volume control.
Buzzing noise on
answer machine
Your answering
machine is too close
to a radio, TV, computer,
cordless or mobile
telephone, causing
interference. Move it
another metre away.
No indicator
light appears
Is the adaptor
switched on?
Is the power cord
plugged into the back
of the Response 15
unit?
No dial tone on
the telephone
Is the telephone cord
plugged into the back
of the Response 15
unit?
Is the Response 15
cord plugged into the
wall socket?
Reponse 15’s display
is flashing
continuously
This indicates an
error. Press any button
on your answering
machine. Flashing
should stop and the
answering machine
should reset to its
settings on first ‘power
up’. Unplug the line
cord and power cord.
Wait 5 mins and then
replug.
Response 15’s battery
low indicator is on
The back-up battery is
either low in power,
missing or incorrectly
installed. Lift your
answering machine
speaker cover and
open the battery
compartment. If the
battery is correctly in
place, try replacing it
with a new 9V alkaline
battery. When
operating at normal
power the battery
light remains off.
You experience a
power cut
If a working battery is
installed inside your
answering machine,
its settings and
battery
low
messages
battery
low
volume
+