Filter
Top Products
2 | Commercial Wireless ISW‑EN4216R LCD Receiver
Status Indication
The LCD shows the current condition of each transmitter.
The LCD also provides a history of past events including
activation, tamper, low battery, and inactivity.
Supervision and Expansion
Transmitter supervisory check-in and a transmitter specific
supervisory window, defined in the receiver, support sites
with both removable pendants and fixed-position
transmitters. The technology also supervises repeaters.
Enroll, supervise, and map up to sixteen wireless
transmitters and repeaters using the appropriate outputs.
Configure transmitters and repeaters individually to best
suit the application.
Certifications and Approvals
Region Certification
USA UL AMCX: Central Station Alarm Units (ANSI/
UL 1610,ANSI/UL 1635), ANET: Holdup
Alarm Units (UL 636), APAW: Police
Station-connected Alarm Units (ANSI/UL
365, ANSI/UL 464), APOU: Proprietary
Alarm Units (ANSI/UL 1076), NBSX:
Household Burglar Alarm System Units
(ANSI/UL 1023), NBSX7: Household
Burglar Alarm System Units Certified for
Canada (ULC/ORD-C1023)
Inovonics Wireless Corporation holds the following approvals:
FCC Conforms to FCC Part 15 regulations
Installation/Configuration Notes
Compatibility Information
The ISW‑EN4216R LCD Receiver is compatible with the
following products:
Repeater
ISW‑EN5040‑T High‑power Repeater
Transmitters
ISW‑EN1210 Universal Transmitter (Single‑input)
ISW‑EN1210EOL Universal Transmitter with EOL Resistor
ISW-EN1210SK Survey Transmitter
ISW‑EN1210W Door-Window Transmitter with Reed Switch
ISW‑EN1215EOL Universal Transmitter with Wall Tamper and EOL Re-
sistor
ISW‑EN1215WEOL Door‑Window Transmitter with Wall Tamper, Reed
Switch, and EOL Resistor
ISW‑EN1223D Water-resistant Pendant Transmitter (Double‑but-
ton)
ISW‑EN1223S Water-resistant Pendant Transmitter (Single‑but-
ton)
ISW‑EN1223SK Survey Pendant Transmitter
ISW‑EN1233D Necklace Pendant Transmitter (Double‑button)
ISW‑EN1233S Necklace Pendant Transmitter (Single‑button)
ISW‑EN1235D Beltclip Pendant Transmitter (Double‑button)
ISW‑EN1235S Beltclip Pendant Transmitter (Single‑button)
ISW‑EN1235DF Fixed-location Transmitter (Double‑button)
ISW‑EN1235SF Fixed-location Transmitter (Double‑button)
ISW‑EN1242 Smoke Detector-Transmitter
ISW‑EN1247 Glass-break Sensor Transmitter
ISW-EN1249 Billtrap Transmitter
ISW‑EN1260 PIR Motion Sensor‑Transmitter (Commercial and
High‑end Domestic Applications)
ISW‑EN1261HT PIR Motion Sensor‑Transmitter (High‑traffic Areas)
ISW‑EN1262 PIR Motion Sensor‑Transmitter (Residential and
Low‑traffic Commercial Applications)
ISW‑EN1265 PIR Motion Sensor‑Transmitter (Ceiling‑mount Ap-
plications)
Parts Included
Quant. Component
1 ISW‑EN4216R Receiver
1 Hardware pack
1 Literature – Installation and Operation Manual
Technical Specifications
Electrical
Power Requirements: 10 VDC to 14 VDC
Environmental
Relative Humidity: Up to 90%, non‑condensing
Temperature (operating ): 0°C to +60°C (+32°F to +140°F)
Mechanical
Material: ABS
Closure: Latching with optional screws for high secur-
ity installations
Dimensions: 16.5 cm x 8.9 cm x 2.5 cm
(6.5 in. x 3.5 in. x 1 in.)
Weight: 204 g (7.2 oz)