Filter
Top Products
Unpacking
Your Bogen equipment was carefully checked before leaving the factory; inspect the shipping container and unit
closely for improper handling. If the unit has been damaged, make an immediate claim to the distributor from
whom it was purchased. If the unit was shipped directly to you, save all shipping materials and notify the carrier
immediately and place a claim.
Wiring and Grounding Precautions
The MCP35A master control panel of the PI and SI products operates from a 120V 60Hz AC source and con-
sumes approximately 100 watts. The AC line cord is terminated in a three-prong plug, and should be plugged
into an appropriate three-wire grounded outlet. It is important that the unit be properly grounded. Three-prong
pigtail adapters may be used only if the ground lug is properly grounded.
Auxiliary Power Receptacle
An 840-watt, three-wire grounded outlet is provided on the rear panel for power auxiliary equipment. Equipment
connected to this outlet will be grounded only if the MCP35A control panel is properly grounded.
Maintenance & Service
Caution
There are no user-serviceable parts within the unit. Have all internal servicing performed by a
qualified technician. The warranty will become void if repairs are made by other than the Bogen
Service Department or an authorized service agency.
Our Applications Engineering Department is available to help you troubleshoot problems with your Bogen equip-
ment. Engineers are available from 8:30AM to 8:00PM Eastern Standard Time. Phone (201) 934-8500, exten-
sion 2242.
Service can be obtained from our factory service department. No merchandise may be returned for repair with-
out prior written authorization. Please contact our factory service department at 1-800-999-2809 for a RA num-
ber. Only merchandise specified in the return authorization form can be returned to obtain warranty or non-war-
ranty repair. When shipping your unit, pack your system well using the original shipping carton or a similar con-
tainer and filler material to prevent damage in transit. Send the unit fully insured and prepaid via UPS or other
responsible carrier.
4