Bogen PCM2000 Pager User Manual


  Open as PDF
of 2
 
Manual Sections Affected:
Section 1 — PBX Loop Start Trunk Port , PBX Ground Start Trunk Port
Feature:
Trunk Disconnect
Purpose:
Allows the PCM2000 to issue a one-second disconnect signal (loss of loop cur-
rent) after its default time or VOX time has elapsed.This applies only to Loop
Start and Ground Start applications and is defeatable.The disconnect signal can
allow compatible equipment to clear the paging line should a paging phone be
improperly hung up.
New Feature Codes:
FEATURE FEATURE CODE ADDITIONAL DATA DEFAULT CONDITION
Trunk Disconnect 014 Inhibit Inhibit
015 Enable
PCM2000 ADDENDUM
The PCMTIM module has a feature that was not listed separately in its User’s Manual.
Manual Sections Affected:
Section 1 — PBX Loop Start Trunk Port , PBX Ground Start Trunk Port
Feature:
Trunk Disconnect
Purpose:
Allows the PCM2000 to issue a one-second disconnect signal (loss of loop cur-
rent) after its default time or VOX time has elapsed.This applies only to Loop
Start and Ground Start applications and is defeatable.The disconnect signal can
allow compatible equipment to clear the paging line should a paging phone be
improperly hung up.
New Feature Codes:
FEATURE FEATURE CODE ADDITIONAL DATA DEFAULT CONDITION
Trunk Disconnect 014 Inhibit Inhibit
015 Enable
PCM2000 ADDENDUM
The PCMTIM module has a feature that was not listed separately in its User’s Manual.
50 Spring Street
Ramsey,NJ 07446
Tel.: 201-934-8500; Fax: 201-934-9832
www.bogen.com
50 Spring Street
Ramsey,NJ 07446
Tel.: 201-934-8500; Fax: 201-934-9832
www.bogen.com
 previous