Filter
Top Products
Set Flash
1
In standby mode, press SET/STO button.
Ö The display shows ' SET 1 DATE '.
2
Press UP or DOWN button until the display
3 Press SET/STO to confirm.
4
Press UP or DOWN button to select 100
Time
shows 'SET 3 FLASH'.
This telephone gives you the possibility to
services of your network provider.
When pressing the RECALL button, the phone
interruption and the length
depends on your Flash Time setting.
(default),300, 600, or 1000.
5
Press SET/STO button to confirm the setting.
Ö
The display shows ' SET 1 DATE ' , you can
programming, or press DELETE
button to return to
use the special services
generates a line
continue with
standby mode.
Making a
1
Lift the Handset, listen for a dial tone.
Ö
The display shows ' 00-00
'.
2 Dial the telephone number you wish to call.
3 To end the call, return the Handset to the
call
5. Telephone Operations
Ö
The display shows the number as you
14 digits will be shown).
Base unit.
dial(maximum of
To answer a
call
When the phone rings;
Lift the handset or press the SPEAKERPHONE
on the Base unit.
Ö
The Call timer starts about 7 seconds after
going on line.
To adjust the
speakerphone
volume
During a call;
Adjust the volume of the speakerphone to your
volume level using the
SPEAKERPHONE
volume switch located at
the right side of the Base unit.
Replace the Handset on the Base unit cradle or
press the SPEAKERPHONE button on the Base
unit.
Ö
The SPEAKERPHONE light indicator will
To end a call
turn OFF.
To switch
between the
Handset and the
Speakerphone
During a phone conversation through the
Handset,
press the SPEAKERPHONE button to speak
The Speakerphone light will turn on, but
hands-free.
through the Handset until
on the
Base unit cradle. while in speakerphone mode,
Handset to enable a private conversation.
button
comfortable
conbrtdsyion remains
the Handset is speakerphone replaced
lift the
Telphone Operation continue...
Last
Redial
1
Lift the Handset or press the SPEAKERPHONE
2
Press LNR button.
Ö The phone automatically dials the last
(maximum of 32 digits).
button on
Mute
1
During a call press
button.
Function
ÖWhen the mouthpiece is muted, the person
end of the call cannot hear you
but you can hear his side.
2
To get back to the call, pressMUTE
button again to release.
MUTE
the Base unit.
number you called
at the other
Inserting a
Pressing PAUSE button immediately after the
Pause in
For some switchboard system, an access number
dialed (usually an 8 or 9) to get another
outside line.
the dialing
sequence
number, a pause of about 3.6 seconds
and the desired number can be dialed immediately.
Press PAUSE button to insert a pause when dialing or
storing Long Distance Access Codes.
1
2
Number
Storing a
1
Number in
2
Press M1.M2,M3 button to stored.
M1,M2,M3
memorys
3
2
Key in the telephone number
Up to a maximum 16 digits.
Ö
Press SET/STO button.
In standby mode,
you
3
Dial out
Stored
ÖThe number dials automatically.
press M1,M2,M3 buttons.
number
2
3
Press the (0-9) button to store the number in the
Storing a
Number in
(0-9)
two-touch
memorys
1
2
Key in the telephone number
3
selected memory.
Up to a maximum 16 digits.
Ö
Lift up Handset or press the SPEAKERPHONE button,
Pd Y^Va V cjbWZg hidgZY ^c Pld1idjX]bZbdgn .41=/
C s1.< =8 <0- 0~6,;-< 7: 8:-;;
ecYU^Ydc[baY
*=<<76
C w:-;; <0-
`Y`bdj
*=<<76 Ztmt[
C r-A 16 <0- 5-57:A 47+~<176 6=5*-: Z_]h[
Press
SET/STO button.
In standby mode,
you wish to stored.
Ö The number dials automatically.
Dial out
Stored
number
1
2
(0-9)
two-touch
memorys
must be
dial tone and an
access
will be entered,
wish to stored.
6. Caller Display Operation
VERY IMPORTANT:
To use Caller Display you must first subscribe to your network provider's
The caller's number
The date and time of the call
Caller Diaply service.
includes:
If you subscribe to a Caller Display service, you can see the phone number
you before you answer. The caller display information
of the person calling
Condition of Incoming Caller Information
It is a duplicate one
It is a new one
It has exceeded the range of the service
It is a secret one
It may not be nicety for the reason of outside
There is a voice information in your mailbox
(This function is available only when you have
applied for this service from your telecommunication
network)
LCD Screen will display
REP
NEW
UNAVAILABLE
WITHHELD
ERROR
Caller Display list
Spirit 410 dynamically stores up to 30 groups (12digits) incoming information.
If a call is received when the Call list is full, then the new entry will replace
the oldest one.
Viewing the
1
In standby mode, press UP or DOWN Dutton.
Caller
Ö The display shows the most recent record.
If there are no Caller Display records, the display
2
Press UP or DOWN again to scroll to the next
Caller Display record.
will show
Display list
To return
a call
When the Caller Display record is displayed.
ÖThe phone automatically dials out the
displayed record.
Lift the handset or press the SPEAKERPHONE button on
the Base unit.
7. Guarantee and service
This product is guaranteed against manufacturing defects for a period of 1 Year.
This does not cover the product where the fault is due to misuse, abuse,
of the instructions, or where the product has been the
or alterations, or has been the subject
of commercial use.
In the event of a problem with the product within the guarantee period
your nearest Argos store.
If the item is shown to have had an inherent defect present at the time of sale,
provide you with a replacement.
Your statutory rights remain unaffected.
Guarantor; Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
use in contravention
subject of unauthorised modifications
please return it to
the store will
' 00 CALL'
Standard Spirit 410 Telephone
Temperature range Operating 0 ºC to 40 ºC
Storage -20 ºC to 60 ºC
PBX compatibility Timed break recall: 98 ms. Pause length: 3.6 seconds.
Signalling type: DTMF (dual-tone multifrequency) also
called tone dialing.
Network connection This equipment is intended to be used in the UK only.
Operation on other countries’ PSTN termination points
cannot be guaranteed.
Declaration of conformity
The Binatone Spirit 410 phone complies with the essential protective
requirements and objectives of:
EC R&TTE Directive 1999/5/EC
EC Low Voltage Directive 2006/95/EC
EC EMC Directive 89/336/EEC
and conforms to the following relevant harmonized standards:
Network: TBR37, TBR38
EMC: EN 55022, EN 55024
Safety: EN 60950
Binatone operates a policy of continuous product improvement, and so
make changes to the product and functions without notice.
Wasteelectricalproducts mustnot bedisposed
of withhousehold waste.
This equipmentshould be takento your local
recycling centrefor safe treatment.
8. Technical details
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
reserves the right to
Use on PBX
Press R (RECALL) button on your
If you are using your Spirit 410 phone on a PBX,
user guide tells you to press RECALL;
Spirit 410 phone.
and the PBX
To delete
Caller
record
When the Caller Display record is displayed.
ÖThe display shows the next Caller Display
Press and hold DELETE button 3 seconds,
Display records will be deleted.
Press DELETE button will delete the Caller
Display record.
ÖThe display automatically return to standby
Display
record.
mode.
all the Caller
Connection and conditions for use
Y
ou can connect your Spirit 410e phone to a direct exchange line (DEL) -
connected to a local exchange, with its own phone number; to an
socket connected to a DEL; or to an extension on an approved
Do not connect the Spirit 410 phone as an extension to
a pay phone.
The ringer equivalence numbers (RENs) of all instruments (phones, fax
etc.) connected to an exchange line must not add up to more than
one or more of them may not ring and/or answer calls correctly.
The Spirit 410 phone has a REN of 1, and most other telephones have a
unless marked otherwise.
a line
extension
compatible PBX.
machines,
4
- otherwise,
REN of 1
Contents of this User Guide
1. Where to find it
2. Installation
3. Wall mount installation
4.
Setting up your phone
5. Telephone operation
6. Caller display operation
If you need help …
The Binatone Help Line is
available from 9.00 am to
5.00 pm, Monday to Friday, on
0845 345 9677
Calls are charged at Local Call
rate.
7.
8.
Guarantee and service
Technical details
Pressing buttons on your phone
When the instructions in this user guide tell you simply to ‘press’ a
you should press the button briefly, then release it.
When the instructions tell you to ‘press and hold’ a button, this means
you should
keep the button pressed until the display changes and/or you
hear a tone.
button, this means that
UK Argos Ver2 Jan 2008