Filter
Top Products
26
.
Alarm Settings
You can set an alarm time on the handset. When an alarm is set, the
<ALARM Icon> is shown on the handset display.
When the alarm time is reached, the <ALARM icon> and “ALARM ON” flash
on the handset display and the alarm melody plays for 45 seconds. You
can press any key to disable the alarm. If the snooze function is activated,
the alarm will sound again at the end of the snooze period of seven minutes.
Note:
a. A key press will still disable the alarm even if the handset keypad is
b. The alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to VOLUME OFF, the alarm still
c. During an external call or internal call, if an alarm is set and when the
alarm time is reached, the <ALARM icon> and “ALARM ON” will still
flash. An alarm tone will be emitted from the earpiece to notify user the
alarm time is reached. Once the user presses any key or presses and
d. During paging or ringing, the alarm will not sound when the alarm time is
reached. However, if the snooze function is enabled and there is no
paging or ringing, the alarm will sound again at the end of the snooze
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> to show ALARM.
3. Press <MENU/OK> and <UP/DOWN> to select ON/OFF.
sounds at VOLUME 1 level.
4. Press <MENU/OK> to confirm.
Note: If ON is selected, you will be asked to set the alarm time.
locked when the alarm rings.
holds <OFF> to disable the alarm, it will revert to the call duration screen.
period.
4. Press <MENU/OK> and then enter the date in the format you set in
Section 8.1.1.
5. Press <MENU/OK> to confirm.
Note: If the date has been set before, the current date will display,
otherwise it will show the date starting from
“ ”after power
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to select SET DATE.
01-01-11
8.1.4 Set the Date
up or a reset.
8.2
8.2.1 Turn on/off the Alarm