Filter
Top Products
Activating the City X Mode will not change Super
Wideband Ka,K or instant-on X band Radar alert patterns.
Note—the cty mode does not change the presentation of alerts
for Laser, sws
™
or vg-2 signals.
City ALL (X/K/Ka)-Model 926 only
City ALL provides an alternated approach for improving X,
K and Ka band selectivity and is ideal for use in areas with a
high level of microwave trasmissions which can cause falsing
on all three bands.To engage City X/K/Ka mode,press
until the Dispay shows a capital “
A”.Once engaged,weak X,K
or Super Wideband Ka signals encountered will provide no
audible alerts until the signal strength reaches a preset level.
Visual alerts are processed the instant an X,K or Super
Wideband Ka signal is detected,keeping you quietly informed.
Reset to Factory Settings
You can reset your unit to factory settings for volume,,
, and Selectable Features.With the unit , press
and hold button then press the and
P/V buttons
simultaneously. Two “beeps” and “F”in the digital display,
confirm that the unit is reset to the original factory settings.
Your unit is now and ready for operation.
Safety Warning System
®
, vg-2 Guard
®
Alert, 60 sws
™
Digital
Voice Messages (Model E926CS only) and Digital Voice
prompts for Radar/Laser/vg-2 Guard
®
are all features which
may be selected or , depending upon your preference.
These Selectable Features are referenced by the digits #,#,#3
and #4 respectively.
Safety Warning System
®
(sws
™
)— #
When on,unit will provide an sws
™
warning when sws
™
transmitters are detected. Factory setting is .
selectable features
12892 Bel Express 926/916 Man 4/26/01 2:44 PM Page 8