Filter
Top Products
5
Handset Registration With Your BellSouth A50
The following steps are for registration of additional handsets (model A50E):
1. Make sure the BellSouth A50 base unit is connected into the AC outlet and phone
jack. Your BellSouth A50 handset will show HS-1 (Handset 1) on the LCD.
2. Press and hold the /PAGE button on the base unit. After 3 seconds, press the
“CH” button on the handset until you get a beep and the display will read HS-2.
3. If you have more than two handsets, press the “CH” button on the handset until you
get a beep and the display reads HS-3. Release the /PAGE button from the
base.
NOTE: The /PAGE button on the base unit should be kept pressed during the whole
procedure.
Congratulations! You can now enjoy the benets of your BellSouth A50/A50E Ultra-
Clear Sound Shaping Expandable Cordless Telephones.
Headset Operation
Your A50E handset is equipped with a 2.5mm headset jack for use with an optional acces-
sory headset for hands-free operation. If you choose to use the headset option, you must
obtain an optional accessory headset, which is compatible with the handset.
Headsets are available at most retail outlets that sell telephone equipment or contact
BellSouth at 800-586-9828 or visit www.bellsouthspecialneeds.com.