Belkin F1PG200ENAU Telephone Accessories User Manual


 
76
Knowing your Phone Adapter
Knowing your Phone Adapter
7
section
2
1
3
4
5
6
(e) Power Jack
Connect the included 5VDC, 2.4A power supply to this jack.
When you apply power to the Phone Adapter or restart it, a short
period of time elapses while the Phone Adapter starts up (about 30
seconds). During this time, you will see all the LEDs flash on, and
then off. When the Phone Adapter has completely started up, the
power LED will light, indicating the Phone Adapter is ready for use.
A. Connected LED
This LED lights in GREEN to indicate that your modem is
connected to the router. It blinks rapidly when information is
being sent over the port between the Phone Adapter and the
modem.
Solid Green Connected to router
Blinking Green Internet activity
Off No physical connection
B. Phone LED
These LED lights (1 and 2) illuminate in GREEN to indicate that
your Phone Adapter is ready to make or accept a call.
Solid Green Phone Adapter is ready to make or accept a
call
Off Phone Adapter did not successfully register
for service
LEDs
A B