Filter
Top Products
— 6 —
MAX-X3 3-WAY MONO OPERATION
Rear Panel
1. Set Mode switch to Mono mode.
2. Plug the line-in into INPUT 1.
3. Connect LOW OUT 1 to the Low frequency amplier.
4. Connect LOW OUT 2 to the Midrange frequency amplier.
5. Connect HIGH OUT 2 to the High frequency amplier.
NOTE:
Do not connect anything into INPUT 2.
Do not connect anything from HIGH OUT 1.
(The inputs/outputs are automatically normalled when unplugged).
Front Panel
1. BBE 1 …………………………………………………… BBE main control
2. INPUT 1 ………………………………………… main input level control
3. LOW GAIN 1 …………………… Low frequency amplier level control
4. XOVER FREQ 1 …………… set to x1 - LOW-MID Crossover control
5. HIGH GAIN 1 …………………………………………… set to 0 and Mute
6. INPUT 2 …………………………………………………………… set to 0
7. LOW Gain 2 …………………… Mid frequency amplier level control
8. XOVER FREQ 2 ………… set to x10 - MID-HIGH Crossover control
9. HIGH GAIN …………………… High frequency amplier level control
INSTALLATION