Filter
Top Products
5
Installation
Use the following instructions to install your Lucent Technologies 9101
telephone.
Contents of the 9101 Package
The following items come in the box with the 9101 telephone:
• A 7-foot line cord
• A 9-foot handset cord
Desk/Table Installation
For desk or table installation, use the 7-foot straight line cord that
came with your telephone to connect the telephone to a modular jack.
WARNING: Do not plug the handset cord into the line jack on the
bottom of your telephone since it could damage your handset and the
telephone.
1 Plug one end of the line cord into the line jack on the
top/rear of the telephone. See Figure 1 for the location of
the line jack.
2 Plug one end of the coiled handset cord into the handset
jack on the side of the telephone. See Figure 1.
3 Plug the other end of the handset cord into the handset.
4 Hang up the handset.
5 Plug the free end of the line cord into a modular jack.
6 Lift the handset and listen for dial tone.
Note: When you have installed the telephone, you can set
the ringer volume and ringer pitch as desired. (See Figure 1
for the location of the Ringer volume switch and the Ringer
pitch control.)