13
14
Analog
Adjunct
3.5 mm
Phono Plug
from
Recording
Device
10
!
WARNING:
• Analog adjuncts and the recording device must be co-located with the 2420 Telephone and 20-type
stand.
• The distance between the 200-type module and the analog adjunct should not exceed 3 meters in the
EU countries.
• The distance between the 201-type module and the recording device should not exceed 200 feet/60.96
meters.
• For the 201-type module, the record output impedance is approximately 600 Ohms, and the output
channel is isolated from the telephone via a voice transformer that meets the UL 60950 Dielectric
breakdown requirement of 1,000 VRMS for one minute.
Slot 2
--
200-Type
200-Type
200-Type
Slot 1
201-Type
200-Type
--
201-Type
Supported Module Combinations