Filter
Top Products
5-12
Issue 1 July 2001
Pause (During Abbreviated Dialing)
The Pause feature allows a pause to be programmed into an Abbreviated Dialing
entry when setting up an abbreviated dialing number or list.
Priority Calling
The Priority Calling feature lets you place an internal call with a distinctive ring
(usually a 3-burst ring) to indicate your call needs immediate attention.
Placing a priority call
1. If your System Administrator has programmed one of the Line/Feature
buttons to represent Priority Calling, press that button,
or
Press
Menu
, then press the softkey below
PCall
,
or
Dial the Priority Calling Access Code.
2. Dial the extension and wait for the person to answer.
The extension called receives three ring tones and the message "Priority"
displays.
If your call is not answered, you can redirect it to a person on coverage. While the
phone is ringing, press the Line/Feature button your System Administrator has
designated as the Go to Cover button.
Changing a regular call into a priority call (when
you hear a call waiting ringback tone)
When you hear the ringback tone indicating the phone is in use, stay on the
line and follow the steps above for placing a priority call using the Menu
and appropriate softkey, or by pressing the designated Line/Feature button;
note that you cannot use an access code after dialing an extension. If you
still receive a call waiting ringback tone, hang up and place the priority call
again in a few minutes.