Filter
Top Products
Initial operation of your IP telephone
16
GB
Connecting and registering the IP telephone
After connection to the power supply and to the LAN (Local Area Network) a search
run
for a gatekeeper (responsible for access rights) is automatically started in the
telephone. Usually a gatekeeper is found, and you can then make a call right away.
However, it will not yet be possible to take calls. To do this you first have to enter
your number and PIN.
Scroll to the Log in new user status message.
Confirm selection.
... Enter extension number.
Scroll to the SecPIN or PIN menu item.
... Enter the PIN.
Confirm selection. The display then shows the message "Secure log-on
complete" or "Log-on complete." From now on you can also be reached under
the number (extension number) that you have entered.
• For unencrypted communication the default setting for the PIN is 0000 (if
user is asked for a PIN).
• For secure encrypted communication your system administrator will tell you
the default setting for the PIN (if user is asked for a SecPIN).
• After the first time you log on to secure communication, an information
message will ask you to change your PIN. It is advisable to change your
PIN right away so that no one who knows your default PIN can log on to
another phone using this phone number.
• You can only ever be reached on one telephone under your number
(extension number).
So if you log on to a second telephone with PIN and extension number, you
can then be reached there under your number (extension number) but no
longer on the first telephone.