18
To turn the Emergency Channel feature on or off:
- Press and release the EMG Button; EMG appears on the display
together with a Channel 20 indication.
- When the transceiver is set to Emergency Channel 20, The trans-
ceiver transmits and receives on a special frequency (CH20:
462.6750 MHz).
- To turn off the Emergency Channel feature, press and release the
EMG Button
Battery Alert
When the battery icon ( ) blinks on the LCD panel, recharge unit or
install fresh batteries. If the batteries are not replaced the (
) icon will
appear and an audio tone will sound to warn the user that the batteries
must be replaced.
NOTES FOR GOOD COMMUNICATION
1 . The GMRS1100-2CH 22 channels are shared on a ‘take turns’ basis.
This means other groups may be talking on any of the channels.
A common code of ethics/courtesy is to switch to another vacant
channel and not to attempt to talk over someone who is already using
the channel you first selected.
2. The GMRS1100-2CH has been designed to maximize performance
and improve transmission range in the field. To avoid interference,
it is recommended that you do not use the units closer than 5 feet
apart.
3. For best transmission results, always keep your mouth about 2-3
inches from the microphone (12) and speak slowly in a normal voice.
4. To increase battery life, avoid features such as Scan, Dual Watch and
Weather Alert. These features will reduce operating time
considerably.