Audiovox FR142 Two-Way Radio User Manual


 
1
FCC WARNINGS
This device complies with part 15 of the FCC rules, operation is
subject to the condition that this device does not cause harmful
interference.
Use only the supplied antenna. Unauthorized antennas,
modifications, or attachments could damage the transmitter and
may violate FCC regulations.
Features
No Air Time Fees and No License Required Up to 2 miles range
Auto Battery Saver and Auto Squelch 14 Channel
Monitor and Key Lock Button Multi-function LED Display
Talk Confirmation Tone and Call / Ring Button Detachable Belt Clip
PRECAUTIONS
Do not modify or attempt to adjust the transceiver for any reason.
Avoid extremes in exposure to water, heat, and cold. This
transceiver is weather resistant but not waterproof.
Do not expose the transceiver to long periods of direct sunlight,
nor place the transceiver close to heating appliances.
Do not place the transceiver in excessively dusty areas, humid
areas, wet areas, nor on unstable surfaces.
If smoke or something unusual is coming from the transceiver,
immediately switch OFF the power and remove the batteries from
the transceiver. Contact your dealer.
UNPACKING
Carefully unpack the transceiver. We recommend that you identify
the items listed below before discarding the packing material.
Transceiver .......1 Belt Clip ....... 1 Instruction Manual ....... 1
Controls and Indicators
1. Transmission/Reception indicator
2. PTT button
3. MONITOR button
4. ENTER/LOCK button
5. UP/DOWN buttons
6. Microphone
7. POWER button
8. MENU button
9. CALL button
10. Power Saver mode
indicator
11. LED display
Display and Indicators
LED display - indicates Channel numbers, Volume level, Lock,
Beep, Low Battery Level, etc.
Transmission and Receiption indicator - When transmitting, the
indicator stays on. The indicator flashes when receiving a singal.
Power Saver Mode indicator - flashes in Power Saver Mode.
1
2
3
5
11
6
4
8
10
7
9