Filter
Top Products
128-7005
15 of 20
Troubleshooting
15
Weak or no Weak batteries Replace batteries
signal received Channel Adjust the transceiver’s
not set the same settings to match those
as target transceiver settings of the target
transceiver
Volume level too low Increase volume level
PTT Button inadvertently Release PTT Button
depressed
Excessive radio interference Change to a different
on a particular channel channel
Obstruction of radio signal Avoid operating in or near
large buildings or vehicles
Unit beeps, but Batteries extremely Replace batteries
will not function discharged
when turned on
Reception of Interference from Turn the devices off or move
unwanted electronic devices such farther away from them.
signals as computers or TVs
Problem Possible cause Correction
No transmission Weak batteries Replace batteries
while pressing Incorrect battery polarity Install the batteries using
the PTT Button the directions for correct
battery installation.