Filter
Top Products
16
Bluetooth setup
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the telephone
base, keep the device within 15 feet of the telephone base for optimal
performance.
Add a cell phone
To pair and connect a cell phone:
Press MENU on the telephone base in idle mode to
enter the main menu.
Press CID or DIR to highlight Bluetooth, then
press SELECT .
Press SELECT to choose Add device.
Press CID or DIR to highlight Add cellular, then
press SELECT . The screen displays Please wait...
followed by 1. If cell is connected to BT device,
please disconnect it.
Press NEXT. The screen displays 2. Place cell phone
next to base.
Press NEXT to turn on the telephone base
discoverable mode. The screen displays Set cell to
search base: AT&T DECT 6.0 discoverable PIN: 0000.
Promptly turn on the Bluetooth feature of your cell
phone and search for or add new devices.
Your cell phone may require a passcode. In this case
the handset screen displays Check cellular. ENTER
PASS CODE. Enter the cell phone passcode into the
handset and press SET to save.
Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process. The handset displays Adding Cell Phone A to
device list...
When a device is successfully connected, the
telephone base displays Cell Phone A is added and
connected to base. You hear a confirmation tone.
The corresponding status icon ( 1 or 2) displays.
The corresponding device light on the telephone base
(DEVICE 1 or DEVICE 2) turns on.
If you have trouble pairing your cell phone, it may not be compatible with
your TL96271/TL96371/TL96471. Check the Bluetooth compatibility list
at www.telephones.att.com.
NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again.
The steps for the pairing process may vary for different cell phones. If this happens,
follow the prompts on your cell phone and your TL96271/TL96371/TL96471 to
complete the pairing process.
Refer to the user’s manual of your cell phone on how to search for or add a new
Bluetooth device.
1.
2.
3.
4.
5.
6.
7.
8.
9.
•
•
•
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
Directory
Caller ID log
Intercom
Bluetooth
BACK SELECT
ADD DEVICE
Add cellular
Add headset
BACK SELECT
Set cell to
search base:
AT&T DECT 6.0
discoverable
PIN:0000
Adding
Cell Phone A
to device
list...
Cell Phone A
is added
and connected
to base.