Filter
Top Products
7
Bluetooth setup
Manual connection
To manually re-connect a paired device, make
sure the Bluetooth feature is turned on in your
cellular phone, select AT&T DECT 6.0 from the
paired device list in your cellular phone. Once the
connection is established again, the Bluetooth
button on the telephone base will turn back on.
Turning off the auto connection
If you do not want the telephone base to re-
connect to a paired device automatically after
it is disconnected, you can turn off the auto
connection feature manually. In order to turn off
the auto connection, you will need to initiate a
disconnection from the paired cellular phone; this
will transmit a signal to the telephone base and
disable the auto connection.
While the cellular phone is connected to the
telephone base, find the cellular phone’s Bluetooth
device list and select AT&T DECT 6.0 to manually
disconnect the device. (If disconnection is not an
option on your cellular phone, you may need to
disable Bluetooth or unpair the telephone base.)
Refer to your cellular phone’s user’s manual for
instructions. The telephone base will not search
and re-connect to this cellular phone until this
feature is activated again.