Filter
Top Products
Appendix B
Troubleshooting
16
SEARCHING FOR
BASE appears
on my cordless
handset.
• Ensure that the telephone base is powered
up.
• Place the cordless handset in the telephone
base for one minute to allow the cordless
handset and base to resynchronize
channels.
• Move the cordless handset closer to the
telephone base. You might have moved out
of range.
• Reset the telephone base. Unplug the unit’s
electrical power. Wait for 15 seconds then
plug it back in. Allow up to one minute for
the cordless handset and telephone base to
reset.
• Other electronic products can cause
interference with your cordless phone. Try
installing your phone as far away from these
types of electronic devices as possible:
television sets, VCRs, or other cordless
telephones.
The handset
screen shows
PRESS HNDST
LOC 4 SEC ON
BASE and the
handset is out
of the telephone
base or charger.
• Unplug the battery from the handset and
plug it back in (pages 8-9). The screen
should now show NOT REGISTERED and
you can follow the registration instructions
on page 11.