Filter
Top Products
11
Appendix
Expand your telephone system
Add and register a handset
When first purchased, each expansion handset shows
Press and hold
HANDSET LOCATOR
on base for 4 sec, then
press # on handset after a battery is installed. Each handset
should be charged without interruption for at least 30 minutes
before registering to the telephone base. For more details on
battery charging, see the table on page 9.
To register a handset:
Press and hold
/HANDSET LOCATOR on the
telephone base for about four
seconds until the red IN USE light
turns on.
Press # on the handset. Its screen
shows Registering...Please wait
and it takes up to 60 seconds
to complete the registration.
The handset shows HANDSET
X Registered (X represents the
handset number assigned) and you
hear a beep when the registration
is completed.
NOTES:
If the registration fails, the handset shows Registration failed for a few
seconds and then
Press and hold
HANDSET LOCATOR
on base for
4 sec, then press # on handset.
Try the registration process again.
You cannot register a handset if any other system handset is in use.
1.
2.
1.
2.
Appendix
For TL92320/TL92370/
TL92420/TL92470
For TL91270/TL91370