Filter
Top Products
To attach the
belt clip:
Snap the belt
clip into the
retaining tabs on
both sides of the
handset as shown
in the figure.
To remove the belt
clip:
Gently lift either of the
belt clip retaining tabs,
shown in the figure,
outwards to remove
the belt clip from the
handset.
Plug a 2.5 mm
headset into the
jack on the side
of the handset.
Lift the rubber
flap here.
For handsfree headset conversations, use any industry standard
2.5 mm headset (purchased separately). For best results, use an
AT&T 2.5 mm headset. To purchase a headset, visit our website
at www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
Getting started
Belt clip & optional headset
Side of handset.
11