Filter
Top Products
18
Telephone operation
Options while on calls
Volume control
Press the VOLUME keys on the side of the
handset or on the telephone base to adjust
listening volume. Each press of the button increases
or decreases the volume.
NOTES:
1. All volume settings (normal handset, speakerphone and
headset) are independent.
2. When the volume level has reached the minimum or
maximum setting, you will hear two beeps.
Call waiting
If you subscribe to call waiting service with your
local telephone service provider, you will hear
a beep if someone calls while you are already
on a call. Press PHONE/FLASH on the cordless
handset or press FLASH on the telephone base
to put your current call on hold and answer the
new call. You can press PHONE/FLASH on the
cordless handset or FLASH on the telephone
base at any time to switch back and forth
between the calls.
Conference call using the telephone base or
multiple handset
If you would like to join an ongoing call.
Using a cordless handset:
Press PHONE/FLASH or SPEAKER on another
cordless handset.
Press OFF/CLEAR or place the handset in
the charger to hang up. The call will not be
terminated until all handsets hang up.
Using the telephone base:
Lift the corded handset or press SPEAKER on
the telephone base.
Press SPEAKER or place the corded handset in
the telephone base to hang up. The call will not
be terminated until all handsets hang up.
NOTE: A maximum of
two handsets can be
used at once on an
outside (not an
intercom) call.
Volume
control