AT&T MLS-18D Intercom System User Manual


 
Answering a Call
[ Line ]
or
1. Press the [ Line ] or [ Intercom ] button next to the flashing light.
[ Intercom ]
2.
Lift the handset. (If you Iift the handset without first pressing a
line button, you are connected to the line that has been ringing
the longest time.)
To answer a voice-signaled call (your phone beeps):
1. If the microphone is on, begin speaking (if not press
[
Mic
]
or lift
the handset).
Joining a Call
To connect yourself to an outside call being conducted at
another extension:
[ Line ]
1. Press the
[
Line
]
button next to the steady red light.
2. Lift the handset.
NOTE: you cannot join an outside call, a conference call, or a call at an
extension with Privacy turned on.
Calling Features
To use these features on an MLS-18D, MLS-12D, and MLS-12 phone, press the calling feature
button. To use on an MLS-6 and MLC-6 phone, press [
Feature ] plus the 2-digit code.
Feature
How to Use
on MLS-6
and MLC-6
How to Use on
MLS-18D, MLS-12D,
and MLS-12
Description
Privacy
Last Number
Redial
Recall
Conference
Drop
Not Available
Press [ Privacy ]
Press again to turn off
Press [ Feature ] [ 0 ] [ 5 ]
Press [ Last Num ]
Prevents other people with the
same line from joining your
calls. A steady green Iight next
to [
Privacy
] shows that Privacy
is on.
Redials the last outside num-
ber you dialed. Useful for
redialing a busy number.
"Recalls" a dial tone. If you are
not on a PBX or Centrex, use
Recall to end a call without
hanging – you will get a dial
tone and can then make
another call. Otherwise, use
Recall to get the PBX/Centrex
dial tone.
Press [ Feature ] [ 0 ] [ 3 ]
Press [ Recall ]
Press [ Feature ] [ 0 ] [ 6 ]
Press [ Drop ]
Drops the last party added to a
conference call.
5