AT&T MLS-12D Intercom System User Manual


 
Ringing Patterns
You can tell the type of call coming in by the way the phone rings:
Ring...Ring...Ring...Ring..Ring...Ring...
Outside Call
Ring-BEEP...Rlng-BEEP...Ring-BEEP...
Inside Call
Ring-BEEP-BEEP...Ring-BEEP-BEEP... Transferred Call
Lights
Red (top) Iight shows what is happening on the line at ANOTHER extension
Green (bottom) Iight shows what is happening on the line at YOUR extension.
Steady on:
Line is busy.
Off (off continuously): Line is idle, available for use.
Flash [long on, long off): Call is ringing on the Iine.
Alternating Red/Green Flash: (red on, green on, red on, green on)
Appears at all extensions in a conference or joined call.
Wink (long on, short off): Call is on hold (anyone with line can pick up).
Flutter
(short on, short offf): Conference call is on hold.
Help!
If you have problems with your phone, contact your System Manager.
If the problem is not solved, in the continental U.S. please call our toll-free
Heipline, available 24 hours a day, at 1 800 628-2888. Outside the continental
U.S., contact your local AT&T Authorized Dealer.
Auto Dial Numbers
To store an extension number or outside number for one-touch dialing:
1. Press [ Feature ] [ 0 ] [ 0 ] .
2. Press a programmable Auto Dial button (see p. 3).
3. Press left [ Intercom ] and dial the extension number, or dial the telephone
number up to 20 digits, including special functions, see box below. (To set up
an Auto Dial button for group paging, press [
Intercom ] [ * ] [ 7 ] .)
To store additional Auto Dial numbers, repeat Steps 2 and 3.
4. Press [
Feature ] [ 0 ] [ 0 ] when you are done.
To insert a...
Press...
Pause (1.5 seconds)
Recall
Stop
Touch-Tone Enable
[
Hold ]
[ Spkr ]
[ Mic ]
[ Transfer ]
4