Filter
Top Products
To adjust ringer volume if necessary
(speaker is not active)
1 To raise the volume, press the right half of the
Volume control button labeled [
∧∧ ];
to lower the volume, press the left half of the
Volume control button labeled [
∨∨ ].
SEND ALL CALLS
To send all calls (except priority calls) immediately
to coverage
1
While on-hook, press softkey below SAC
(if shown on the display)
or Press [
Send Calls ]
or Dial Send All Calls access code
.
To cancel Send All Calls
1
While on-hook, press softkey below SAC again
or Press [
Send Calls ] again
or Dial Send All Calls cancel code
.
SPEAKERPHONE
NOTE: To use this feature, your voice terminal must
be set for the Speakerphone (speak and listen)
feature.
To place or answer a call without lifting the
handset, or to use speakerphone with any feature
1
Press [
Speaker ].
2
Place or answer call, or access selected feature.
3
Adjust speakerphone volume if necessary:
●
To raise the volume, press the right half of the
Volume control button labeled [
∧∧ ];
to lower the volume, press the left half of the
Volume control button labeled [
∨∨ ].
To prevent the other party from hearing you
1 Press [
Mute ].
●
Red Mute light goes on.
2
Press [
Mute ] again to resume talking to party.
●
Red Mute light goes off.
8