Filter
Top Products
1
Install the
telephone base
Install the telephone base as shown below.
• Make sure that the electrical outlet is not
controlled by a wall switch.
• Use only the power adapter supplied with this
product.
• The telephone base is ready for desktop use. To
wall mount the telephone base, see page 10 in
the user’s manual.
• See pages 8 and 9 in the user’s manual for
more information on installing the telephone
base.
UP
DOWN
RIGHT
LEFT
12:00 AM
REDIAL
MENU
CID
12:00 AM
Electrical outlet not
controlled by a wall
switch
Power
adapter
Telephone wall
outlet
DSL filter
For DSL
users (not
included)
Telephone
line cord
2
Install the
handset battery
Install the handset battery as shown below.
Step 4
Charge the handset face up
in telephone base, or place
a handset in the additional
charger (EP5632-2 only).
The CHARGE light will be
on when charging.
Step 2
Insert the battery
as indicated with
the top edge
(contacts and
tab) in first, then
push in the lower
portion of the
battery.
Step 3
Align the
cover flat
against
the battery
compartment,
then slide it
upwards until
it clicks into
place.
BATTERY PACK
80-5808-00-00
Step 1
Press the
tab and slide
the battery
compartment
cover
downwards.
• After installing the battery, you can make and
receive short calls.
• For optimal performance, charge the handset
battery for at least 16 hours before use.
• See page 14 in the user’s manual for more
information on installing the handset battery.
3
Connect the first
Bluetooth cell phone
FOLLOW THESE STEPS TO CONNECT YOUR FIRST
BLUETOOTH CELL PHONE. See page 23 in the
user’s manual to connect more cell phones. See
your cell phone’s documentation to learn how
to set your cell phone to search for or add new
Bluetooth devices. Make sure that your cell phone
is not connected to any other Bluetooth device(s).
To pair and connect your cell phone for the first time:
1. Press CELLULAR
on the telephone
base.
2. Press the YES
softkey.
3. Set your cellular
phone to search for
or add new devices,
then press the NEXT
softkey.
4. Once your cellular
phone finds the
AT&T EP5632, select
it, and enter 0000
on your cellular
phone for the PIN.
5. When the pairing is
complete, press the
YES softkey on the
telephone base.
YES
Cellular operation
requires Bluetooth
connection.
Set up Cellular?
Set up Cellular
Set your Cellular to
search for devices,
then press NEXT
Set up Cellular
Pairing in
progress...
PIN = 0000
Set up Cellular
Pairing complete
Connect to
Cellular?
YES
4
Connect the first
Bluetooth headset
FOLLOW THESE STEPS TO CONNECT YOUR FIRST
BLUETOOTH HEADSET. See page 24 in the user’s
manual to connect more headsets. See your
headset’s documentation to learn how to pair and
connect your headset. Make sure that your headset
is not connected to any other Bluetooth device(s).
To pair and connect your headset for the first time:
1. Press HEADSET
on the telephone
base.
2. Press the YES softkey.
3. Set your headset in
discoverable mode,
then press the NEXT
softkey.
4. Once the telephone
base finds your
headset, select it
and press the PAIR
softkey.
5. Enter your headset’s
PIN on the telephone
base, then press the
DONE softkey. The
default PIN for most
headsets is 0000.
6. When the pairing is
complete, press the
YES softkey on the
telephone base.
YES
Headset operation
requires Bluetooth
connection.
Set up Headset?
NO
Set up Headset
Set your Headset in
Discoverable mode,
then press NEXT
Set up Headset
Enter PIN:
0000
DONE HELP ERASE
Headsets Found
Mary's Headset
Set up Headset
Pairing complete.
Connect to
Headset?
NO
NEXT
NO
NEXT
FIND PAIR INFO
YES NO