Filter
Top Products
39
Answering system
RECORD
ANNC.
Message counter displays
When the answering system is idle, the message
counter displays the total number of answering
system messages. See the list below for
explanations of other displays in this counter.
Message counter displays
0 No messages.
0 (flashing) The clock needs to be set (page 34).
1-95 Total number of messages and memos,
or message number currently playing.
1-95 (flashing) Total number of messages and memos.
The number flashes when there are new
(unreviewed) messages.
If the telephone loses power, after power
is restored, the number in the message
counter will flash (even if you have only
old messages) to indicate the clock
needs to be set.
10-99 Current remote access code while setting
(page 36).
1-99 (counting) Elapsed time while recording a memo
(page 38) or announcement up to 90
seconds (page 35).
99 (flashing) Memo recording time has exceeded
the maximum counter capacity of 99
seconds.
F (flashing) Memory is full. Messages must be deleted
before new messages can be received.
-- System is answering a call, being
accessed remotely, or the clock is being
set, or a handset is on a call.
-- (flashing) System is being setup or initialized.
2, 4, 6, tS Current number of rings-to-answer while
setting this feature (page 36).
1-8 Displayed for two seconds while
telephone base speaker volume is being
adjusted.
HI, LO, OF Displayed for two seconds while
telephone base ringer volume is being
adjusted.
Message counter.