Filter
Top Products
31
Answering System Operation
Day and time announcements
To set day and time
Before playing each message, the answering system
announces the day and time the message was received.
Before using the answering system, you should follow
the steps at left to set the day and time, so messages
are dated correctly.
The system uses voice prompts to guide you. Each time
you press CHANGE, the day, hour, minute or year
advances by one. When you hear the correct setting,
press TIME SET to move to the next setting.
To check day and time
You can press TIME SET at any time to hear the
current day and time without changing it.
1
TIME SET
“Friday, 10:07 am, 2003”
8
TIME SET
“2003”
10
@TIME SET
“Monday, 2:26 pm, 2004”
“To change clock,
press Time Set”
2
TIME SET
“Friday”
3
CHANGE
“Monday”
Press until correct day is spoken.
4
TIME SET
“10 am”
5
CHANGE
“2 pm”
Press until correct hour is spoken.
6
TIME SET
“07”
7
CHANGE
“26”
9
@CHANGE
“2004”
Press until correct minute is spoken.
Press until correct year is spoken.
NOTE:
Press and hold
CHANGE
to advance the minute or year by 10.
91-5928-10-00_E5960C CIB_R0.qxd 2/13/1950 7:21 PM Page 31