AT&T E5903B Cordless Telephone User Manual


 
11
Telephone operation
Options while on calls
Volume control
Press VOLUME keys on the side of the
handset to adjust listening volume. Each
button press increases or decreases the
volume by one level.
When you change the volume level, the
new setting is saved.
NOTES:
1. All volume settings, (normal handset, speaker-
phone, and headset) are independent.
2. When you adjust the volume to highest or low-
est, you will hear a double beep.
Call waiting
If you subscribe to call waiting service
with your local telephone service pro-
vider, you will hear a beep if someone
calls while you are already on a call.
Press PHONE/FLASH to put your cur-
rent call on hold and take the new call.
You can press PHONE/FLASH at any
time to switch back and forth between
calls.
Multiple handset use
While on a call, a person on the ring-
ing destination handset can press
PHONE/FLASH or SPEAKER to join
the conversation.
The person on either handset can press
OFF/CLEAR, or place the handset in the
telephone base or charger to drop out
of the call, but the call will not be termi-
nated until both handsets hang up.
TONE
DELETE
PAUSE
MUTE
REDIAL
Press to
switch
back
and
forth
between
calls.
Press to
adjust
the
volume.
NOTE: A maximum
of two handsets
can be used on an
outside call, and
the other two
handsets can be
used on an inter-
com call.