Filter
Top Products
13
Telephone Operation
Handset settings
Handset name
At this menu you can customize the name that appears
on the handset screen when the phone is idle. Press
DELETE to erase letters, then replace them with a
name of your preference, up to 16 characters long (see
page 15 to enter letters). Press SELECT to confirm.
Language
At this menu you can select the language used in all
menus and screen displays. Use the ^V buttons to
select English, Spanish or French, then press SELECT to
save your preference.
Dial Type
At this menu you can choose Tone or Pulse dialing. The
factory default setting is TONE. Change this to PULSE
only if you do not have touch-tone dialing service.
Use the ^V buttons to select TONE or PULSE, then
press SELECT to save your preference.
CLR VOICE MAIL
The NEW VOICE MAIL can be removed from the dis-
play ( and the base LCD indicator turned off) as follows:
• Press MENU.
• Press the ^ or V keys until the CLR VOICE
MAIL option is shown as follows:
• Press SELECT, to enter the message sub-menu.
• Confirm "Turn Indicator Off?" by pressing SELECT.
After this the phone returns to the previous menu.
• Please note, this only turns off the LOCAL indica-
tion of message waiting in the unit (handset). It does
not cancel the message waiting at the telephone ser-
vice provider.
HANDSET NAME
AT&T_
LANGUAGE
ENGLISH
DIAL TYPE
TONE
>DIRECTORY
CALL LOG
>CLR VOICE MAIL
DIAL TYPE
TURN INDICATOR
OFF?
>CLR VOICE MAIL
DIAL TYPE
91-000091-020-000.E5815.RO.qxd 2/13/1950 7:21 PM Page 13