Filter
Top Products
12
Telephone operation
Basic operation
Last number redial
Press REDIAL/PAUSE to display the most recently
dialed numbers (up to 32 digits). Press CID/-VOLUME
or DIR /VOLUME+ repeatedly to view up to five
recently called numbers. The handset beeps twice at
the beginning or end of the list. Press OFF/CLEAR
to exit. Press PHONE/FLASH or SPEAKER to
redial any displayed number. Or press PHONE/FLASH
then REDIAL/PAUSE to dial the most recently dialed
number (up to 32 digits).
Press DELETE to delete the displayed number from
the redial memory.
Temporary ring silencing
Press OFF/CLEAR or MUTE while the telephone
is ringing to silence the ringer temporarily. This
will silence the ringer without disconnecting the
call.
The next incoming call will ring normally.
Handset locator
If the handset is misplaced, press HANDSET LOCATOR
on the telephone base. The handset will play a paging
tone for 60 seconds to help you locate the handset. To
stop the paging tone, press PHONE/FLASH, SPEAKER,
or any dial pad key (0-9, *, or #) on the handset, or press
HANDSET LOCATOR on the telephone base.
NOTES:
1. If the handset ringer is set to off (0), that handset will not
generate paging tone.
2. During a page, if you pressDuring a page, if you press OFF/CLEAR or MUTE on the
handset (see this page above), the ringer of the handset
will be silenced, but it will not cancel the page.
REDIAL
555-1234
RINGER MUTE