Filter
Top Products
Multiple handset use
28
broadcast to the destination handset. While you are speaking,
your handset screen shows PTT To handset: X.
3. Release PUSH TO TAL� after speaking. Both handsets beep
once again. After the handsets beep, you can press and hold
PUSH TO TAL� to continue speaking or the destination handset
can respond (see Answer a PTT call on the next page).
4. To end the PTT call, press OFF/CANCEL or place the handset in the telephone
base or charger. The handset screen shows Push to talk Ended for a few
seconds.
PTT call to a group of handsets
When there are multiple handsets registered to the phone system, PTT supports
one-to-group calls. PTT supports a maximum of one-to-four calls when two to
five handsets are registered, and a maximum of one-to-three calls when six or
more handsets are registered. The first four registered handsets will be able to
use this feature. Other handsets can only use PTT for one-to-one calls.
To call a group of handsets:
1. You have three ways to call a group of handsets. When the
handset is not in use:
Press and hold PUSH TO TAL� until your handset screen
shows Connecting to group...
Press PUSH TO TAL�. Press qCID or pDIR to choose Group. Press
MENU/SELECT or press and hold PUSH TO TAL� until your handset screen
shows Connecting to group...
Press PUSH TO TAL�. Press TONE followed by # (pound key). The screen
shows Connecting to group...
When the connection is made, both the caller and the destination parties hear
a beep. The speakerphones on all other handsets automatically activate.
2. You need to press and hold PUSH TO TAL� when you want to speak. Speak
towards the handset. Your voice is broadcast to all eligible handsets.
3. Release PUSH TO TAL� after speaking.
4. Any extension can reply (see Answer a PTT call on the next page).
NOTE: After PUSH TO TAL� is released, the PTT call remains open for a short time. If no
one presses PUSH TO TAL� within 10 seconds, the PTT call ends automatically.
•
•
•
Push-to-talk (PTT)
PTT To
handset: X
Connecting to
group...