AT&T CL80109 Cordless Telephone User Manual


 
12
Appendix A
Troubleshooting
I cannot get a dial
tone.
First try all the suggestions above.
Move the cordless handset closer to the
telephone base. You might have moved out
of range.
Make sure the power cord is securely
plugged in.
Make sure you plug the battery connector
securely into the cordless handset.
Make sure you plug the telephone line cord
securely and firmly into the telephone base
and the telephone wall jack.
Charge the battery in the cordless handset
for at least 16 hours. For optimum daily
performance, return the cordless handset to
the telephone base or charger when not in
use.
If the battery is depleted, it might take
approximately 10 minutes to charge the
handset before it shows LOW BATTERY,
refer to the table on page 5 for details.
Reset the telephone base. Unplug the
electrical power. Wait for approximately 15
seconds, then plug it back in. Allow up to
one minute for the cordless handset and
telephone base to reset.
You may need to purchase a new battery.
Please refer to Battery installation &
charging in this user’s manual on pages 5-6.
My phone doesn’t
work at all.