Filter
Top Products
1
This quick start guide provides basic instructions. For additional installation
options and complete instructions that enable you to use all features of this
telephone, refer to your AT&T CL4939 big button big display telephone user’s
manual.
If you subscribe to high-speed Internet service (digital subscriber line - DSL)
through your telephone line, you must install a DSL filter between the
telephone line cord and the telephone wall jack. The filter prevents noise and
caller ID problems caused by DSL interference. Please contact your DSL service
provider for more information about DSL filters.
Follow the steps below to install the telephone.
Telephone installation
Plug one end of the coiled handset cord into the handset jack on the left
side of the telephone base. Plug the other end into the handset and hang up.
1.
Plug one end of the telephone line cord into the TEL LINE jack on the back
of the telephone base. Plug the other end of the telephone line cord into a
telephone wall jack.
Plug the small end of the power adapter into the POWER jack on the back
of the telephone base. Plug the large end into a standard electrical outlet
not controlled by a wall switch.
2.
3.
Handset
Coiled handset cord
Telephone line
cord
DSL filter (not included) is
required if you have DSL
high-speed Internet service.
Telephone wall jackElectrical outlet
not controlled by
a wall switch