AT&T AT3211-2 Cordless Telephone User Manual


 
3
Telephone base installation
Install the telephone base as shown below.
IMPORTANT INFORMATION
Use only the power adapter(s) supplied with this product. To order a replacement
power adapter, please call the appropriate number listed below based on your
location: If you live in CT, please call 1 (800) 508-9995. If you live in AL, FL,
GA, KY, LA, MS, NC, SC or TN, please call 1 (800) 733-2355. For all other
states, please call 1 (800) 667-2118.
The power adapters are intended to be correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
1.
2.
If you have DSL high
speed Internet service, a
DSL filter (not included)
is required.
Plug the small end
of the power adapter
into the power jack
on the bottom of the
telephone base.
1.
Route the power
adapter cord through
the channel.
2.
Plug one end of the telephone line
cord into the telephone jack on the
bottom of the telephone base.
3.
Route the telephone
line cord through the
channel.
4.
Plug the large end
of the power adapter
into a power outlet
not controlled by a
wall switch.
6.
Plug the other end
of the telephone line
cord into a telephone
wall jack.
5.