AT&T 982 Conference Phone User Manual


 
Redial
Press L or l, then lift the handset
— OR —
Press K
— OR —
Press h, then press a to call the
last number (up to 24 digits) dialed on the line.
Erase Redial Memory
Press a LINE button, K or h, then press
G, a, G.
Automatic Redial
This phone can automatically and repeatedly redial the
last number you called. While the phone is on hook press
L or l, then press a. You will hear the
numbers being dialed. When the call is answered, you
must either lift the handset or press K or h
to speak with the other party.
If the number you called is busy, the phone will hang up
after 10 busy signals and will redial every 40 seconds up to
10 times (timing begins when the phone is on hook).
To stop automatic redialing before the call is connected,
press a again. Lifting the handset or pressing
K or h will also cancel Automatic Redial.
To stop automatic redialing after the call is connected,
press K or h twice, or lift the handset.
NOTE: This feature will not work if C or
H is pressed. This feature works only when the
handset is in the cradle and charged batteries are
installed.
13
TELEPHONE OPERATION
TELEPHONE OPERATION
982_CIB_3ATT 2/4/05 9:52 AM Page 13