Filter
Top Products
15
Redial
The last number dialed on this phone is stored in redial memory until you
dial another number. To dial the same number again, lift the handset or press
K, listen for the dial tone, then press R.
Auto Redial
Select a line and press A. The screen displays BUSYDIAL as long as
the number you’re calling is busy. The phone redials the number you just
called, and will continue up to 10 times or until the other line rings or you
cancel Auto Redial.
When you hear the line ringing, lift the handset or press K to complete
the call; if you don’t, the phone disconnects the call after 15 seconds. To
cancel Auto Redial, press A, or lift the handset, or press K.
Hold
Press and release H. The light of the line on hold flashes, and a double
beep sounds every 30 seconds to remind you the call is on hold. You can
replace the handset in the cradle without disconnecting the call. The
speakerphone is automatically turned off.
To release Hold, press and release the LINE button of the call on hold.
NOTE: You cannot put an intercom call on hold.
Disabling Hold Reminder
This phone comes programmed to remind you every 30 seconds when you
have a call on hold. You can turn this feature off following the directions
below.
1 Press G, * , #, *.
2 Press and release 4 to turn off the alert beep
— OR —
Press and release 5 to turn on the alert beep.
3 Press and release M. You will hear a confirmation ring.
Switch Between Lines
1 Press and release H to keep a call on the first line.
2 Press and release the LINE button of another line to make or answer
another call.
NOTE: If you switch lines without pressing H first, you will drop
the first call.
OPERATION