Filter
Top Products
PHONE
PROBLEM SOLUTION
To re-initialize the 1 Disconnect the power to the base.
handset and base:
2 Remove spare battery pack (if installed).
3 Remove the handset battery pack.
4 Wait at least 15 seconds.
5 Insert the handset battery pack.
6 Connect the power to the base.
PROBLEM SOLUTION
If you hear noise or • You may be out of range. Move closer to
interference when the base.
using the phone:
• Household appliances plugged into the
same circuit as the base can sometimes
cause interference. Try moving the
appliance or the base to another outlet.
• The layout of your home or office may
be limiting the operating range. Try
moving the base to another location,
preferably on an upper floor.
• Using the handset near household
appliances (microwaves, computers,
televisions, stereos,etc.) can sometimes
cause interference. Move away from
appliances while using the handset.
54
IN CASE OF DIFFICULTY
IN CASE OF DIFFICULTY
5830_CIB_1ATT 2002.11.8 10:31 AM Page 54