AT&T 3070 IP Phone User Manual


 
DO NOT DISTURB
If you don’t want to be interrupted as you work, use the Do Not
Disturb feature to prevent calls from ringing at your voice ter-
minal. Program this feature on a button with lights.
To program:
T/P to P
Touch the button
Dial * 71
T/P to center
To prevent calls from ringing at your voice terminal:
Touch
Do Not Disturb.
The green light next to the button goes on.
Do Not Disturb
When the Do Not Disturb feature is active, the green light next
to your line button flashes when you receive outside calls, but
your voice terminal does not ring. Calls transferred to you return
to the sender after two rings, and intercom calls to you get a busy
signal.
The feature remains active until you:
Touch
Do Not Disturb
again.
The green light next to the button goes out.
Do Not Disturb
NOTE:
If you have a Cover button for one or more people (see
“Call Coverage,” page 34), their voice terminals ring when you
call them on the intercom from your voice terminal even if they
are using the Do Not Disturb feature.
36