AT&T E2600B Cordless Telephone User Manual


 
8
Getting Started
Wall mounting
The telephone base can be installed on any standard wall-phone outlet as shown below.
Choose a location away from electronic equipment, such as personal computers,
television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
Plug power cord transformer
into electrical outlet.
Connect cords as shown, then press
and slide down firmly so base is held
securely on outlet mounting pegs.
Plug short telephone
line cord into telephone
jack.
Clip wall-mount bracket
securely into notches on
underside of base.
Place handset in base to charge
for 8 hours before first use.
Rotate antenna
to fully upright
position.
91-5635-40-00.E2600B.RO.qxd 02/13/1950 19:21 Page 8