Filter
Top Products
Telephone Feature Setup—Base
1 Make sure the phone is off.
2 Press ***. The base sounds a tone,and the POWER and
LINE IN USE lights flash.
3 Follow the directions for each feature as described in
“Base Features.”
4 Press # to save the selected setting and exit
— OR —
Press * to exit without saving.
Base Features
Feature Directions
Ringer Melody
Press 1,2, 3, 4,5, or 6 to select a ringer. You will
hear a sample of the ringer when you press the button.
Dial Mode Set the base to match the kind of dialing service you
have—touch tone or dial pulse (rotary). Press 7 to
change the dial mode. When set to TONE the LINE IN
USE light goes on (during setup only);when set to
PULSE,the LINE IN USE light goes off.
Ringer Volume Press VOLUME + or - until you hear the volume
level you want. To turn the base ringer off,press
VOLUME - until no ringer is heard.
FEATURE SETTINGS
8