AT&T 2256 Cordless Telephone User Manual


 
3 Install the handset battery.
Use only AT&T Battery 3301, SKU# 91076.
4 Charge the handset battery.
Place the handset in the base.
Charge the battery at least 12 hours. After the first charge,
the battery will charge in eight hours.
5 Check for dial tone.
After the batteries are ch a rge d ,lift the handset and pre s s
;you should hear a dial tone.
4
b) Plug the battery pack
connector into handset.
Place the battery pack and
wires in the compartment.
a) Remove battery
compartment cover by
pressing on indentation
and sliding downward.
c ) Replace cover by
sliding it on its
t ra ck up over
b a t t e ry case until
it snaps fi rm ly
into place.