AT&T 210 BLK Conference Phone User Manual


 
7
Getting started
Installation options
If you want to mount your telephone on a wall, use the mounting bracket
provided with the package to connect with a standard dual-stud telephone
wall mounting plate. If you do not have this mounting plate, you can purchase
one from many hardware or consumer electronic retailers. Professional
assistance may be required to install the mounting plate.
Tabletop to wall mount installation
To install the telephone base in the wall mount position, make sure you first
unplug the telephone line cord from the telephone wall jack.
Put the handset aside. Hold down the switch hook on the telephone base,
then slide the handset tab upwards to remove it from the slot. Rotate the
handset tab by 180 degrees. Then replace the handset tab into the slot
until it locks into position.
1.
Insert the protruding tab of the mounting bracket into the groove at
the center of the telephone base. Press down on the small tabs of the
mounting bracket and snap them into the slots at the telephone base.
2.
Switch hook
Handset tab